How to Enter Windows 10 Safe Mode for Troubleshooting Solutions?

Sometimes, whether you like it or not, you have to boot into Windows Safe mode. But with Windows 10, that gets complicated. In this article, we are going to discuss How to restart Windows 10 in safe mode. Windows Safe Mode offers a simple, stripped-down version of the OS. The plans that usually load quickly once you boot Windows don’t try this here. And windows 10 safe mode only uses the most generic drivers. Thus, Windows 10 Safe Mode could be a major support for detecting certain problems. As an example, it’s a terrific place to check for spyware.

Safe mode is a troubleshooting solution for Windows 10 that begins your PC in a small state. Just the standard files and individuals necessary to run Windows are started. Safe mode is advantageous for troubleshooting problems with plans and owners which may not start correctly, or that might stop Windows from starting properly.

When the program cannot fill the mandatory setup greater than twice, the machine will direct the display to Windows RE(Recovery Environment). However, when the program does not immediately lead one to Windows RE following the several attempts, restart the unit and long press the [Power-Button] to force shut down the device when ASUS logo happens, then you are able to enter RE.

How to Enter Windows 10 Safe Mode?

Safe mode is useful for troubleshooting solution for Windows 10 apps, drivers that will fix all the minor Windows issues. If you are using Windows 10, and need to Enter Windows 10 Safe Mode, you can recommend the steps here.

If you should be having difficulty with your PC, safe mode is just a troubleshooting method that can help you identify problems. Secure mode disables unnecessary applications and people at startup, so you can determine whether it’s a basic setting or driver that’s causing your concerns.

Also Read: Fix Windows 10 start menu not working

There are always a number of scenarios which could ensure it is very hard to start Windows in Safe Mode. That is especially frustrating because whatever reason you’ve for the need to access Safe mode is itself probably quite annoying!

For instance, in Windows 10 and Windows 8, Safe Mode is seen from Startup Controls, which itself is reached in the Advanced Startup Options menu. However, Startup Adjustments only appears as an option in Advanced Startup Options in case you get access to it from within Windows.

Luckily, there’s a method to force Windows to start in Safe mode if you can’t get to Startup Controls in Windows 10 and 8, or perhaps the F8 menu (Advanced Boot Selections) in Windows 7 and Vista, or even if you can’t access Windows at all.

  • When you enter Windows RE(Recovery Environment), please select [Troubleshoot].

  • Select Advanced Options.

  • Select Startup Settings.

  • Click Restart.

  • You can select 4)Enable Safe Mode to enter Safe Mode.

  • Note: If your computer can’t automatically be directed to Windows RE(Recovery Environment), you can long press the Power button to power on the device.
  • Now you are in Safe mode.

With Command Prompt open, execute the correct bcdedit command as shown below based on which Safe Mode option you’d like to start:

Safe Mode:

  • bcdedit /set {default} safeboot minimal

Safe Mode with Networking:

  • bcdedit /set {default} safeboot network

Safe Mode with Command Prompt:

  • bcdedit /set {default} safeboot minimal
  • bcdedit /set {default} safebootalternateshell yes

Once Command Prompt is open, execute this command:

  • bcdedit /deletevalue {default} safeboot

Hope you liked this article on How to Enter Windows 10 Safe Mode and How to restart Windows 10 in safe mode. Comment below if you need any help.

Post Comment