When you have been using Windows OS for some time, then there is quite a good possibility that you’re familiar with different BSOD (Blue-Screen of Death) problems including DPC Watchdog Violation. BSODs are often due to hardware errors and low-level applications. But all of the instances these mistakes can be mounted without replacing any equipment component.
DPC Watchdog Violation screen is just a typical error message screen in a blue-screen occurring during the Windows startup. Largely happen if you don’t switch off your Computer/Laptop in an effective way. The screen requires you to restart your PC to resolve this dilemma. Sometimes, it takes some proper handling like reset, refresh to resolve. This problem isn’t much apparent in Windows OS except Windows 8 and Windows 8.1.
This article is a part of an ongoing series on Bluescreen of Death errors. A Bluescreen of Death (BSoD) may be the error screen you notice when Windows has a major concern. It stops the PC and features some extremely important information.
Fix DPC_Watchdog_Violation Error in Windows 10
One of the most typical can be an SSD get that’s old drivers not supported by Windows. Another probable cause is an obsolete driver for just one of your hardware components. Software installations that affect your system software may also bring about DPC Watchdog Violations as well as the matching blue-screen of death.
Fix 1: Restore System in Safe Mode
This is one of the easiest ways to get rid of DPC watchdog violation error. All you need to do is restore your system with the help of the previous backup if you have created one.
Always take a complete backup of your system before going to install any big software on Windows OS.
FIX 2: Update the firmware of your SSD
DPC_WATCHDOG_VIOLATION is a common error in windows that several SSDs can’t handle Windows 8 properly until you update the firmware on the drive. Firmware means memory and code on the system itself that controls it. The newer the firmware, a lot more likely it is to deal with anything new.
The Hard disk era is going to end soon. Within some years, just about all top companies stop delivering Notebook with a hard disk as well as in that place they present SSD. The big advantage of using SSD over HDD will be the speed. But you have to keep your softwares and data updated.
Also Read: Fix Err_Connection_Refused in Windows
To update the firmware of your SSD, you first need to retrieve the model number.
- Press Windows Key + X to bring up the Power User menu
- Click Control Panel > Click System when viewing by Small Icons > Click Device Manager > Click the arrow next to Disk
- Drives > note the model number and download it from Google.
- After an update, you won’t see this error.
Fix 3: Uninstall Faulty Drivers
Go to Control Panel > Device Manager. Now you need to uninstall all the external drivers if you see they are faulty or corrupted. To do that select a particular driver and then right click on it.
Fix 4: Turn Off Fast Startup
- To turn off fast startup, go to Control Panel > click on Power Options > click on Change settings that are currently unavailable.
- Uncheck Turn on fast startup’ and then save the changes.
Fix 5: Using CHKDSK
- Open Command Prompt (Admin) > Type command line CHKDSK C: /F /R into the dialog box > Enter.
- Follow the on-screen instructions > restart your computer.
When the errors are hardware related, a good thing to accomplish is to update the firmware of one’s pieces and the associated people. Firmware and driver updates are usually obtainable in either the Service or Downloads section of most hardware manufacturers websites. When the problems are software-related, you can either reinstall the program(s) it may seem might have started providing the problems or use Windows System Restore function to repair potential system software problems.